A Narrowbanding Update: Essential Tips As Time Runs Out

Posted by Jill McNamara

Thursday, August 23, 2012

Tech Talk: Narrowbanding Help 101 

  1. First, get help! There's only FOUR months left until the deadline. To some of you that may seem like plenty of time, but let me tell you, if you haven't even started the process, you may be out of luck. In any case, the simplest thing to do at this point, especially if you have any questions, is to get help! Chicago Communications can submit both Public Safety and Industrial/Business narrowbanding applications, making it easy for you to accomplish your transition to narrowband operations. We will review your license and submit it directly to the FCC.  That means no third party is necessary to handle your license requirements, saving you a step
  2. Understand what it means...and find your license!     The thing you've probably been hearing over and over by now, (but is still worth repeating) is this: For those of you who have licenses with the Federal Communications Commission (FCC) and are operating in the frequency bands below 512Mhz, you will be required to replace or reprogram your entire radio system by January 1, 2013. The FCC has mandated that each license holder must reduce its bandwidth from 25Khz to 12.5Khz. Effectively cutting your current frequency in half thus creates a new channel. The current radio spectrum below 512Mhz is so congested, that there are not enough channels to go around. By reducing the bandwidth the FCC creates additional spectrum to use. So dig out your license and find out what specific requirements apply to you.
  3. Take action!  This means you need to take a current inventory of your radios throughout your system. For some commercial users this may be two portable radios, to some public safety agencies and towns, this may by two hundred radios. Either way, this inventory will allow the proper review by Chicago Communications to indicate which radios CAN and which radios CANNOT be narrowbanded. The general rule is if the radios were purchased/manufactured BEFORE 1997, they are not capable of being narrowbanded.
  4. Let us get to work! From these list we can generate a quotation to modify existing cable radios or replace radios that are not capable of narrowbanding.  Our field technicians can come on site to survey your equipment while the account representative will provide you with the best options available. Please note that this is NOT an option for you and your license. This is a REQUIRED action by the FCC. If not followed and found in violation of this you may be subject to fines after January 1, 2013.
  5. Time is running out! And as another note, DON’T WAIT! Similar to the transition of digital television, now that we are into the last few months, some radio shops may already be swamped with work trying to meet the deadlines.

Click me

To watch a video about Narrowbanding, click here.


Jill MThis article was written by Jill McNamara,
 Internet Marketing Coordinator at Chicago Communications. Jill has written all of the Meet Our Techs & Employee Spotlight articles for ChiComm's blog and continues to seek opportunities for similar blog articles from current employees & customers. If you'd like to submit a suggestion for JillContact Us!



Topics: Two Way Radios, Chicago Communications, Back-Up Plan, Narrowbanding